Forums > Tech Tips
<< < 1 2 3 4 5 6 7 8 9 10 > >>
Posted by:
771
WebCred
Last Post by:
771
WebCred
Peter Green Pickup Mod
I've been reading about this lately and was thinking about trying it. Anyone familiar with it are done it? Looking for opinions/tips. Thanks.
9 Comments
Last Post: 17 hours 25 minutes ago
Posted by:
0
WebCred
Last Post by:
4487
WebCred
2 conductor humbucker
I have an old Ibanez that I am dusting off. The neck is stamped as an RG 550. However the pickup configuration is odd for a 550. It is H S S. I am using the stock pick ups. The humbucker is a 2 conductor. 1 red wire, 1 white wire. and a braided ground. I also have a new 5 way switch. As strange as it sounds, I have never wired a 2 conductor humbuc...
2 Comments
Last Post: 2 days 12 hours 58 minutes ago
Posted by:
37
WebCred
Last Post by:
263
WebCred
Additional tone
whats the best way to increase your tone on you guitar without buying a new guitar or amp?
21 Comments
Last Post: 4 days 1 hours 30 minutes ago
Posted by:
17
WebCred
Last Post by:
1678
WebCred
NEED HELP CHAINING PEDALS!
I'm running a Seymour Duncan Twin Tube Mayhem, an MXR Carbon Copy Analog Delay, a Dunlop Cry baby original, and an MXR 10 band EQ(And for the record, i used to be a BOSS only guy and have a DS-1, OC-3, Compression Sustainer, Flanger, and Metal Zone, until i opened my heart to other manufacturers, now my boss pedals collect dust!) I need the EQ MAI...
9 Comments
Last Post: 7 days 9 hours 50 minutes ago
Posted by:
1678
WebCred
Last Post by:
1678
WebCred
DIY Speaker Cabs
I'm considering building my own speaker cabs and I'm looking for blueprints for either a 2x12 or 1x12 design. Essentially I think it's basically just constructing a box to put the speakers in and then finding a covering or finishing the wood, but I'd like to at least attempt to build the cab the right way rather than slapping it together. I kno...
11 Comments
Last Post: 7 days 10 hours 3 minutes ago
Posted by:
1146
WebCred
Last Post by:
1678
WebCred
Graphic Equalization to eliminate feedback
I figured I`d write a little ditty on using that EQ you have on your PA system to drive out feedback. But first, let`s discuss what feedback is, and what causes it - and why you eed to avoid it beyond the obvious reasons. Feedback is when a particular frequency gets amplified, hits a microphone, gets reamplified, rinse, repeat. It does this at a...
2 Comments
Last Post: 10 days 17 hours 11 minutes ago
Posted by:
2
WebCred
Last Post by:
3
WebCred
Bright brown "lines" on my acoustic neck...
I bought a Cort MR-740FX acoustic guitar about two years ago. I bought new strings for it about two weeks ago and decided to clean it a bit, I bought D'Andrea Lemon Oil and used it sparingly on the fretboard. I then wiped it away with a dry soft piece of cloth. The dirt from my fingers was totally removed and the fretboard became very clean, but no...
4 Comments
Last Post: 16 days 1 hours 51 minutes ago
Posted by:
1
WebCred
Last Post by:
3
WebCred
Fixing Loose Neck
I have a '88 Kramer Nightswan. Unfortunately, due to the guitar being used so much, the neck has become slightly loose. The bolts are still tight but the neck is shifting up an down, this is causing the guitar to go out of tune. What is the best, or any way, to fix a loose bolt-on neck like this???
6 Comments
Last Post: 16 days 3 hours 50 minutes ago
Posted by:
12
WebCred
Last Post by:
3232
WebCred
true temperament VS buzz feiten
I want to get a better sound, a better intonation, especially with chords, I want everything to sound prefectly in tune. What do you recommend? buzz feiten, true temperament, or is there anything else i don't know??
7 Comments
Last Post: 16 days 4 hours 12 minutes ago
Posted by:
10
WebCred
Last Post by:
3
WebCred
Guitar learnning videos other than youtube?
I am in china!! and youtube is blocked here!!! So does anybody here know any sites where there are guitar learning videos????? I tried using proxies but they take so much time and do not load completely ( they just stop in the middle)!!!!!
1 Comments
Last Post: 16 days 4 hours 13 minutes ago
Posted by:
14
WebCred
Last Post by:
3
WebCred
Drop Tuning with FLOYD ROSE
HI everyone. I just bought a Schecter c-1 FR Hellraiser and I'm really happy with it, the floyd is working pretty well no problems. I got it in standard tuning but 90% of the stuff i play is in drop d (just the E dropped to D). How should I do this? there are a lot of articles out there but none of them help. Should I unlock the nut for the E & A s...
15 Comments
Last Post: 16 days 6 hours 20 minutes ago
Posted by:
17
WebCred
Last Post by:
3232
WebCred
Need metal pedal advice
I need a new distortion pedal. I'm playing a boss MT-2 and have been for about 10 years. Well, after much soldering, it finally bit the dust. Is there a more adjustable pedal out there with two stomp buttons for more drive that i don't know about? The big metal muff isn't meaty enough, and the Vox Saturate is just pathetic for metal. Any help...
10 Comments
Last Post: 17 days 2 hours 54 minutes ago
Posted by:
2
WebCred
Last Post by:
2
WebCred
Tubes
Is there an easy way I can check the tubes in my bassman at home. Voltmeter? What should I look for?. The amp in question is a 72 Bassman 10. Any help would be appreciated.
3 Comments
Last Post: 17 days 21 hours 28 minutes ago
Posted by:
0
WebCred
Still Humming
I have a question. I have just installed a 1 meg volume pot. Replacing the 500k stock pot. Also I have completely shielded (using copper shield tape) the control cavity and the top side humbucker cavities (this is a schecter, 2 humbucker, 1 vol., 1 tone) Everything is fine except for a hum that I am getting in the middle of the volume sweep. The gr...
0 Comments
Last Post: 19 days 22 hours 6 minutes ago
Posted by:
0
WebCred
Last Post by:
0
WebCred
Wiring problem with new dimarzio DP409
I just bought a Dimarzio DP409 Virtual Vintage Heavy Blues 2 pickup for my Ibanez RG. It has a HSH set up and according to dimarzio I need to wire it like this... http://www.dimarzio.com//media/diagrams/B2.pdf Except I only have 4 wires.... Green and Red. and then black and white soldered together and insulated and cut very short. (this is...
5 Comments
Last Post: 27 days 23 hours 58 minutes ago
Pages: 1 2 3  ....  8 9 10  Jump to:

Previous Next page
Contact us   |   Spread the word   |   Interested in Advertising   |   Provide Content
© 2009 Guitar.com, Inc. All rights reserved.
Guitar.com, Guitardotcom and the logo, are service marks of Guitar.com, LLC.